| General |
|
| Total Number of Controlled Axis |
8 |
| Total Number of Spindle Axis |
1 |
| Number of Follower Axis |
2 |
| Gantry Pairs |
2 |
| |
|
| Performance |
|
| Minimum Execution Speed |
50,000 Blocks per second |
| Motion Control Accuracy |
15 Digit Floating Point |
| Look-Ahead Distance |
80 Buffers (Approximately 3 Inches) |
| |
|
| Feed Functions |
|
| Feedrate Override |
Up To 31 Programmable Steps, 0.0% to 199.9% |
| Feed Range |
0.51 to 32,000 mm/sec (0.02 to 1250 ipm) |
| G0 Override (Rapid Traverse) |
Programmable Steps, 1% to 100%, Usually 25%-50%-75%-100% |
| Positioning |
Up to 64,000 mm/min (2500 ipm) |
| Maximum Encoder Counts |
4,000,000 per second |
| Minimum Resolution |
0.001 micron (1 nano-meter) |
| Maximum Acceleration |
10g |
| Programmable Limits for Maximum Feed |
Per Axis: Positioning, Jog, Dry Run, Feed |
| Programmable Limits for Maximum Acceleration |
Per Axis: Positioning and Interpolation |
| Programmable Jerk Factor |
For all axes: Positioning and Interpolation |
| Jog |
Common: Positioning and Interpolation |
| Maximum Linear Table Travel per Command |
Approximately 2,000,000,000 Encoder Counts, Approximately 1 Kilometer |
| Maximum Rotary Axis Travel per Command |
Approximately 2,000,000,000 Encoder Counts, or 10,000 Revolutions, with Optional Electronic-Unwind |
| Rotary Axis Programming Mode |
Degree, Regardless of Inch/Metric |
| |
|
| Spindle Functions |
|
| Speed Command |
1 to 999.999 RPM |
| Speed Override |
0% to 125% |
| |
|
| Memory Capacity |
|
| RAM Size |
256MB up to 2 GB |
| Hard Drive Size |
80GB up to 200GB |
| Maximum Individual Program Size |
250 MB or 1,000,000 Lines |
| Disk Storage per 1 MB |
Equivalent to 2.5 km of Tape (1.5 Mile) |
| Chained Program Size |
Limited Only by Disk Space |
| Number of Programs |
Limited Only by Disk Space |
| |
|
| Tool Functions |
|
| Tool Data Storage (Includes Length, Radius/Diameter, Ball/Bull Nose Compensation) |
254 Tools per Table (mixed inch/metric data) |
| Tool Selection |
M6 Txxx |
| |
|
| Compensation Features |
|
| Lead Screw Compensation |
1 Table per Axis, Variable Size (Random Points), Dynamically Interpolated |
| Mapping (3D Compensation) |
1 Table of Unlimited Size (Full Geometry Correction) |
| Compensation table size |
65,000 Random Location Points |
| |
|
| Programming |
|
| Digital I/O |
up to 144 Inputs, 144 Outputs |
| Analog and Odd I/O |
up to 18 Addresses (Analog I/O’s are Multiplexed) |
| G-Code Compatibility |
ISO Standard |
| Powerful Program Editor |
Built In Word Processor |
| Positioning Addresses |
ABC, IJK, UVW, XYZ |
| Units of Measurement |
Inch or Metric |
| Settable Fixture Offsets (Work Coordinates) |
Standard is 9 (g54 to g59.3), Can be Extended to 99 |
| Coordinate Systems |
Cartesian, Polar, Spherical, Toroidal |
| Maximum Value of Any Dimension |
1,000,000,000,000.0000 mm |
| Range of Dwell |
0.01 second to 300,000 years |
| Parameters |
100 for Programs, 100 for Canned-Cycles (15 digit) |
| Parameters in User Defined Arrays |
up to 8200 |
| PLC Registers |
400 (16 bit) |
| PLC Compiler |
Native Intel® Code |
| CNC Compiler |
Virtual (Byte) Code |
| |
|
| Data Transfer |
|
| Communications |
Fast Ethernet, RS-232, USB |
| Removable Media |
3.5” Floppy, CD-ROM, Jump Drive |